달력

5

« 2024/5 »

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
2023. 3. 28. 18:45

Z10PA-D8 + E52696v3 x2 (Turbo Unlock) Computer2023. 3. 28. 18:45

Turbo Unlock (custom bios) - E5 v3시리즈만 가능( https://www.2cpu.co.kr/PDS/13345 )

 

E52696v3 (18C 36T) x 2  (2699v3의 oem버젼) 

> All core turbo 3.2GHz (cpu수율에 따라 약간의 차이남) 

CPU x1 - 피크 소피 전력 164W

CPU x1 - aliexpress - 51.94$ (2023.02.28)

 

 

 

 

.

.

 

'Computer' 카테고리의 다른 글

pc to pc / 1:1 direct 10G 연결  (0) 2023.03.28
(old) ASUS Z10PA-D8 (nvme m.2 512G)  (0) 2022.12.31
DNS server  (0) 2021.04.29
Vray NEXT benchmark  (0) 2019.04.18
GDC EXP egpu  (0) 2019.01.12
:
Posted by fx0275
2023. 3. 28. 14:56

pc to pc / 1:1 direct 10G 연결 Computer2023. 3. 28. 14:56

Mellanox ConnectX-3 CX311A

(출시된지 10년 넘은 NIC로 중고가 저렴)

하드속도 또한 따라줘야 최대 속도가 나오고 설정값에 따라 속도차가 클 수 있다.

드라이버,펌웨어 >

NVIDIA WinOF-2: Firmware - Driver Compatibility Matrix

Mellanox OFED for Windows - WinOF / WinOF-2 (nvidia.com)

 

A컴. pcie 3.0x4 (글카 슬롯 공유 x16반토막 해서 x8슬롯 사용)                              B컴. pcie 2.0x4

 

 

 

 

처음 설치시 한쪽만 속도 반토막 나서 한참 헤메다가

윈도우 드라이버말고 멜라녹스(현재 nvidia)에서 드라이버 받아서 새로 설치했습니다.

 

MTU,Jumbo packet 값 설정하고 테스트 하니 속도 잘나옵니다.

먼저 jumbo packet 값은 최대값(9614)으로 잡아주고 MTU값은 적용 가능한 최대값 근처로 설정, 

드라이버 속성에 있는 performance에서 default로 튜닝 해줬습니다.

 

 

 

performance 튜닝 옵션 정보는  링크에서 확인하시면 됩니다. 어려운 내용들이라 간단히만 보고 넘겼습니다. 

General Performance Optimization and Tuning - WinOF v5.50.52000 - NVIDIA Networking Docs 

 

아래는 테스트 결과 입니다.

pcie 3.0x4 -> pcie 2.0x4  

속도는 만족 스럽네요.

pcie 2.0x4 -> pcie 3.0x4  

대역폭 최대치는 10G를 오버 하지만 속도차가 조금 납니다.

 

pcie 3.0x1 -> pcie 2.0x4  

x8슬롯을 다시 글카에게 넘겨주고 x1으로 셋팅 했네요. 양쪽 속도차이 거의 없습니다.

 

 

기록용으로 2cpu 포럼에 글 올림 - 10G 1:1 연결. 멜라녹스 드라이버로 하세요. :: 2cpu, 지름이 시작되는 곳!

 

'Computer' 카테고리의 다른 글

Z10PA-D8 + E52696v3 x2 (Turbo Unlock)  (0) 2023.03.28
(old) ASUS Z10PA-D8 (nvme m.2 512G)  (0) 2022.12.31
DNS server  (0) 2021.04.29
Vray NEXT benchmark  (0) 2019.04.18
GDC EXP egpu  (0) 2019.01.12
:
Posted by fx0275
2022. 12. 31. 11:57

(old) ASUS Z10PA-D8 (nvme m.2 512G) Computer2022. 12. 31. 11:57

https://www.youtube.com/watch?v=U1Fq92hYWFo 

 

To get good boot times do two things:
1. Remove the ASMB8/IKVM Chip at the bottom of the board (this cuts the boot time in half). After this change, I would consider the boot time to be almost regular; about 30-40 seconds to OS login screen.
2. (Optional) Make sure you installed your OS in UEFI mode and disable legacy boot in the UEFI menu ("bios").

 

nvme m.2 2280  512G~  > bios 3801   :-)

 

'Computer' 카테고리의 다른 글

Z10PA-D8 + E52696v3 x2 (Turbo Unlock)  (0) 2023.03.28
pc to pc / 1:1 direct 10G 연결  (0) 2023.03.28
DNS server  (0) 2021.04.29
Vray NEXT benchmark  (0) 2019.04.18
GDC EXP egpu  (0) 2019.01.12
:
Posted by fx0275
2021. 4. 29. 12:38

DNS server Computer2021. 4. 29. 12:38

검열로 인해 dns 느릴때 변경.

 

ipv4 1.1.1.1 or 1.0.0.1 or 8.8.8.8

ipv6 2606:4700:4700::1111 or  2606:4700:4700::1001

 

skb sk브로드밴드용 dns

ipv4 168.126.63.1 or 168.126.63.2

 

'Computer' 카테고리의 다른 글

pc to pc / 1:1 direct 10G 연결  (0) 2023.03.28
(old) ASUS Z10PA-D8 (nvme m.2 512G)  (0) 2022.12.31
Vray NEXT benchmark  (0) 2019.04.18
GDC EXP egpu  (0) 2019.01.12
how to fix Cintiq Touch problem on multiple monitor  (0) 2019.01.03
:
Posted by fx0275
2019. 4. 18. 09:10

Vray NEXT benchmark Computer2019. 4. 18. 09:10

https://benchmark.chaosgroup.com/next/cpu?order=desc&orderBy=cpu&search=

 

V-Ray Benchmark | Chaos Group

 

benchmark.chaosgroup.com

 

 

-----------------------------------------------------------------------------------------------------------------------------

 

 

 

 

 

'Computer' 카테고리의 다른 글

(old) ASUS Z10PA-D8 (nvme m.2 512G)  (0) 2022.12.31
DNS server  (0) 2021.04.29
GDC EXP egpu  (0) 2019.01.12
how to fix Cintiq Touch problem on multiple monitor  (0) 2019.01.03
Vray Rendering Benchmark  (0) 2018.05.09
:
Posted by fx0275
2019. 1. 12. 10:00

GDC EXP egpu Computer2019. 1. 12. 10:00


Done.




dell studio 1555 (2009year)


Ati Radeon HD4570

gpu-M92(680Mhz)

mem-512M(800~1600Mhz)

mem bus width-64bit

Bandwidth-12.80Gb/s



expresscard 34m - pci-e 1.1

data speed-250MB

transfer speed 2.5GT/s( = 2.5*(8b/10b)=2.0Gb?)


 

 pci-e

version

Year

Line Code

Speed

×1

×2

×4

×8

×16

1

2003

8b/10b

2.5 GT/s

250 MB/s

0.50 GB/s

1.0 GB/s

2.0 GB/s

4.0 GB/s

2

2007

8b/10b

5.0 GT/s

500 MB/s

1.0 GB/s

2.0 GB/s

4.0 GB/s

8.0 GB/s

3

2010

128b/130b

8.0 GT/s

984.6 MB/s

1.97 GB/s

3.94 GB/s

7.88 GB/s

15.8 GB/s

4

2017

128b/130b

16.0 GT/s

1969 MB/s

3.94 GB/s

7.88 GB/s

15.75 GB/s

31.5 GB/s

 



gdc exp - 


PCI-E X16:DMI GT/s (X1) 5



Power support:
8P interface: 220W max.
DC interface: 150W max.


------------------------------------------------------------------------------------------------------


Titan xp

Memory Interface Width 384-bit

Memory Bandwidth (GB/sec) 547.7


gtx1080

Memory Interface Width 256-bit

Memory Bandwidth (GB/sec) 256


gtx1070

Memory Interface Width 256-bit

Memory Bandwidth (GB/sec) 256


gtx1060

Memory Interface Width 192-bit

Memory Bandwidth (GB/sec) 192


gtx1050

Memory Interface Width 128-bit

Memory Bandwidth (GB/sec) 112


gtx1050

Memory Interface Width 64-bit

Memory Bandwidth (GB/sec) 48





--------------------------------------------------------------------------------------------------------------------

EXP GDC eGPU로 그래픽카드를 인식못할때 DSDT override 설정하기
(장치관리자에서 pci브릿지 등 살펴보면 인식못한것에 대한 설명이 있다)
오류코드 12확인(장치 사용 가능한 리소스 부족)

DSDT(Differentiated system Description Table)-ACPI(Advenced Configuration and Power Interface) 구성의 일부분
> DSDT 패치 - 시스템 사용 제한이 걸려 있는 부분을 커스텀 패치하여 사용 가능하도록 한다.


과정중에 %iasl%\iasl DSDT_MacbookP_EGPU.dsl 에서 
Length가 다르거나 오버값이라고 에러가나면
헥사코드로 max-min+1을 해서 length에 넣어주고 진행하면 된다.



https://egpu.io/forums/pc-setup/fix-dsdt-override-to-correct-error-12/#step1


https://www.techinferno.com/index.php?/forums/topic/5874-guide-dsdt-override-to-fix-error-12/




'Computer' 카테고리의 다른 글

DNS server  (0) 2021.04.29
Vray NEXT benchmark  (0) 2019.04.18
how to fix Cintiq Touch problem on multiple monitor  (0) 2019.01.03
Vray Rendering Benchmark  (0) 2018.05.09
윈도우 창 세로 스냅핑하기.  (0) 2018.03.17
:
Posted by fx0275


cintiq터치와 실제 인식되는 화면이 다를때 수정하는 방법.



https://blog.naver.com/lightingss/221281648978


>태블릿 pc설정에서  디스플레이 지정해주면 해결.




제어판에서 태블릿 pc 셋팅이 안보일 경우.>

https://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/tablet-pc-settings-is-missing/b55ab19d-ee5a-4973-84c5-39aabd723d31


Go to the Desktop.

 

Right click on the Desktop and select New/Shortcut.

 

In the Type the location of the item window, Copy/Paste the following.

 

%windir%\explorer.exe shell:::{80F3F1D5-FECA-45F3-BC32-752C152E456E}

 


Click the Next button and type the name Tablet PC Settings.

 


Click the Finish button.

'Computer' 카테고리의 다른 글

Vray NEXT benchmark  (0) 2019.04.18
GDC EXP egpu  (0) 2019.01.12
Vray Rendering Benchmark  (0) 2018.05.09
윈도우 창 세로 스냅핑하기.  (0) 2018.03.17
i7-8700K + asus maximus x apex  (0) 2018.03.11
:
Posted by fx0275
2018. 5. 9. 09:17

Vray Rendering Benchmark Computer2018. 5. 9. 09:17

https://www.chaosgroup.com/vray/benchmark


free download

https://kubadownload.com/vray-benchmark-download.1772.html


result list

https://benchmark.chaosgroup.com/cpu?page=1



cpu - 8700k 51/49 oc

gpu - 1080ti x1


cpu - 2690v4 es x2

gpu - 1060 x1



gpu-rx560x1 02:43



other benchmark referenced site

https://www.pugetsystems.com/all_articles.php


https://www.pugetsystems.com/all_articles.php?filter[]=Processors

'Computer' 카테고리의 다른 글

GDC EXP egpu  (0) 2019.01.12
how to fix Cintiq Touch problem on multiple monitor  (0) 2019.01.03
윈도우 창 세로 스냅핑하기.  (0) 2018.03.17
i7-8700K + asus maximus x apex  (0) 2018.03.11
allan mckay's the VFX Hardware Guide  (0) 2018.01.07
:
Posted by fx0275
2018. 3. 17. 12:04

윈도우 창 세로 스냅핑하기. Computer2018. 3. 17. 12:04

윈도우 창 정렬.

기본 : 윈도우키+방향키 ( 세로 정렬이 되지 않음)


autohotkey 스크립트를 이용해 세로 정렬가능


https://autohotkey.com/download/


https://gist.github.com/AWMooreCO/1ef708055a11862ca9dc

 


윈도우 시작 메뉴에 추가해서 사용.


AdvancedWindowSnap.zip



Directional Arrow Hotkeys:

HotkeyBehavior
Win + Alt + UPWindow will snap to the top half of the screen.
Win + Alt + DOWNWindow will snap to the bottom half of the screen.
Ctrl + Win + Alt + UPWindow will snap to the top third of the screen.
Ctrl + Win + Alt + DOWNWindow will snap to the bottom third of the screen.

Numberpad Hotkeys (Landscape):

These will work only if you have NumLock turned ON. These are ideal for Landscape Monitors.

HotkeyBehavior
Win + Alt + Numpad 7Window will snap to the top-left quarter of the screen.
Win + Alt + Numpad 8Window will snap to the top half of the screen.
Win + Alt + Numpad 9Window will snap to the top-right quarter of the screen.
Win + Alt + Numpad 1Window will snap to the bottom-left quarter of the screen.
Win + Alt + Numpad 2Window will snap to the bottom half of the screen.
Win + Alt + Numpad 3Window will snap to the bottom-right quarter of the screen.

Numberpad Hotkeys (Portrait):

These will work only if you have NumLock turned ON. These are ideal for Portrait Monitors.

HotkeyBehavior
Ctrl + Win + Alt + Numpad 8Window will snap to the top third of the screen.
Ctrl + Win + Alt + Numpad 5Window will snap to the middle third of the screen.
Ctrl + Win + Alt + Numpad 2Window will snap to the bottom third of the screen


'Computer' 카테고리의 다른 글

how to fix Cintiq Touch problem on multiple monitor  (0) 2019.01.03
Vray Rendering Benchmark  (0) 2018.05.09
i7-8700K + asus maximus x apex  (0) 2018.03.11
allan mckay's the VFX Hardware Guide  (0) 2018.01.07
3DSMax CPU bench  (0) 2017.03.10
:
Posted by fx0275
2018. 3. 11. 19:24

i7-8700K + asus maximus x apex Computer2018. 3. 11. 19:24

system

i7-8700k

asus maximus x apex

g.skill trident 3200 cl14 16x2

nzxt kraken x62

corsair hx1000i



50/48   3900


51/49 3900


'Computer' 카테고리의 다른 글

Vray Rendering Benchmark  (0) 2018.05.09
윈도우 창 세로 스냅핑하기.  (0) 2018.03.17
allan mckay's the VFX Hardware Guide  (0) 2018.01.07
3DSMax CPU bench  (0) 2017.03.10
xeon E5-2690 v4 ES x2  (0) 2016.12.15
:
Posted by fx0275